Fixing and buying guide

Who this product is for

This roof window is ideal for homeowners and builders installing windows in bedrooms, home offices, or other quiet spaces where external noise is a concern. The top-operated mechanism makes it particularly suitable for rooms where floor space is limited or where furniture placement beneath the window is necessary. It is also a good choice for anyone who values easy maintenance and safe cleaning access.

• Bedrooms in noisy locations requiring sound reduction
• Rooms with limited floor space or fixed furniture layouts
• Properties requiring low-maintenance, easy-clean windows
• Homeowners wanting modern aesthetics with practical operation

Sizing and compatibility

The MK08 2062 measures 78x140cm and is designed to fit standard roof pitches and rafter spacings. Before purchasing, confirm that your roof structure can accommodate this window size and that the rafter spacing matches the MK08 specification. Check your roof pitch is between 15 and 90 degrees. Ensure the installation location has adequate headroom and that the window opening can be properly flashed and sealed to your roof covering type, whether slate, tile, or other materials. Consult the installation manual or your surveyor if you are uncertain about compatibility.

Pack contents and features

Your window arrives complete with the centre-pivot frame in white paint, special sound-insulating glazing, a removable and cleanable ventilation filter, and pre-fitted brackets for blind installation. The top control bar is integrated into the design for easy operation. The window rotates 180 degrees to allow safe cleaning of the outer glass from inside. A removable ventilation filter helps protect your home from dust and insects while allowing air circulation. Blinds are not included but can be quickly attached using the pre-fitted brackets.

• Centre-pivot frame with white paint finish
• Special sound-insulating glazing and extra sound insulation
• Top-operated control bar for easy access
• Removable and cleanable ventilation filter
• Pre-fitted brackets for blind installation
• 180-degree rotation for safe outer glass cleaning

Pre-installation checks and preparation

Before installation, inspect the roof opening to ensure it is square and level, and that the surrounding structure is sound and free from rot or damage. Verify that the roof covering can be properly removed and refitted around the window frame, and that appropriate flashing materials are available for your roof type. Check that the rafter spacing matches the MK08 specification. Ensure you have access to the roof space above the window for proper installation and sealing. If you plan to upgrade to a remote-controlled motor in future, confirm that mains power or solar panel mounting is feasible at your installation location. Have the installation manual available and consider whether professional fitting is required for your roof type and pitch.

• Confirm roof opening is square, level, and structurally sound
• Verify rafter spacing matches MK08 specification
• Check roof pitch is between 15 and 90 degrees
• Ensure appropriate flashing materials are available for your roof type
• Confirm access to roof space for installation and sealing
• Plan for future motor upgrade if required