Fixing and buying guide
VELUX EDL MK04 2000 Pro+ Standard Flashings W/ Installation Products 78x98cm
What this product is and who needs it
Standard flashings are the weatherproofing component that sits between your VELUX EDL MK04 2000 Pro+ rooflight and the roof structure. They create a sealed perimeter around the rooflight opening to prevent water penetration. You need this product if you are installing a VELUX EDL MK04 2000 Pro+ rooflight into a pitched roof with a timber frame of grade F16, F24 or F36. This kit is suitable for both trade installers and experienced DIY customers undertaking rooflight installation work.
- Essential weatherproofing component for rooflight installation
- Prevents water ingress around the rooflight perimeter
- Designed specifically for VELUX EDL MK04 2000 Pro+ models
- Suitable for pitched roof installations only
Compatibility and sizing
These flashings are engineered for the VELUX EDL MK04 2000 Pro+ rooflight model and accommodate roof openings up to 78cm wide by 98cm long. Confirm your rooflight model and opening dimensions before ordering. The flashings are compatible with timber grades F16, F24 and F36. If your timber grade differs or your opening exceeds these dimensions, you will need alternative flashings.
- Maximum opening size: 78cm wide × 98cm long
- Compatible timber grades: F16, F24, F36
- For VELUX EDL MK04 2000 Pro+ rooflights only
- Verify your rooflight model and opening size before purchase
Pack contents and finishes
Each kit includes the standard flashing and all necessary installation products required for a complete professional installation. This means you have everything needed in one purchase without sourcing additional components separately. The flashings are available in multiple finishes including white and grey, allowing you to match your roofing scheme and aesthetic preferences.
- Flashing and installation products all included
- Available finishes: white, grey and other options
- Choose finish to match your roofing scheme
- No additional installation products required
Pre-installation checks
Before fitting, confirm that your roof opening dimensions do not exceed 78cm wide by 98cm long, and verify that your timber frame is grade F16, F24 or F36. Check that you have the correct VELUX EDL MK04 2000 Pro+ rooflight model. Ensure your roof is pitched and suitable for this type of flashing installation. Have all tools and safety equipment ready, and follow VELUX installation instructions carefully to achieve a weather-tight seal.
- Confirm rooflight model is VELUX EDL MK04 2000 Pro+
- Measure roof opening: must not exceed 78cm × 98cm
- Verify timber grade is F16, F24 or F36
- Check roof is pitched and structurally sound
- Read VELUX installation instructions before starting work