Fixing and buying guide

What this product is and who needs it

This is a standard flashing kit designed exclusively for the VELUX EDL MK06 2000 Pro+ rooflight system. It is essential for anyone installing or replacing a VELUX EDL MK06 2000 Pro+ rooflight in a timber frame or rafter construction. The flashing prevents water penetration around the rooflight opening by creating a secure seal between the rooflight frame and the roof structure. It is a critical component of any rooflight installation and must match your rooflight model and size.

Compatibility and sizing

This flashing is compatible only with VELUX EDL MK06 2000 Pro+ rooflights and is suitable for units up to 78cm in length and 118cm in width. Before purchasing, confirm that your rooflight is the EDL MK06 2000 Pro+ model and that its dimensions do not exceed these maximum measurements. The flashing is designed for timber frame and rafter applications; if your roof structure differs, you may require a different flashing type.

• Compatible with VELUX EDL MK06 2000 Pro+ rooflight system only
• Maximum rooflight dimensions: 78cm length × 118cm width
• Suitable for timber frame and rafter installations
• Check your rooflight model and size before ordering

What is included and pre-installation checks

This kit includes the standard flashing and all necessary installation products required to fit the flashing into your timber frame or rafter structure. Before installation, inspect the rooflight opening to ensure it is clean, dry, and free from debris. Verify that the roof structure is sound and that rafters or timber framing are in good condition. Check that your rooflight model matches the EDL MK06 2000 Pro+ specification and that its dimensions fall within the 78×118cm maximum size.

• Standard flashing and installation products included
• Clean and dry the rooflight opening before fitting
• Inspect timber frame and rafters for damage or rot
• Confirm rooflight model and dimensions match this flashing specification
• Ensure roof structure is structurally sound

Installation and weather performance

The flashing is engineered to provide a durable, watertight seal that withstands harsh weather conditions. Installation products are included to support secure fixing into timber frames and rafters. Follow the manufacturer's installation instructions carefully to ensure the flashing is correctly positioned and sealed. Proper installation is essential to prevent water ingress and maintain the integrity of your roof structure.