Fixing and buying guide
VELUX Standard Flashings 94x140cm EDL PK08 0000
Who this product is for
This flashing suits homeowners and builders installing or replacing VELUX skylights on pitched roofs. It is equally appropriate for DIY installations and professional roofing work. If your roof pitch exceeds 30 degrees, you will need to select an alternative flashing designed for steeper pitches.
- DIY installers fitting VELUX skylights
- Professional roofers and contractors
- Homeowners replacing damaged or worn flashings
- Suitable for roof pitches up to 30 degrees only
Compatibility and sizing
This flashing is sized at 94×140cm and is designed specifically for VELUX skylights. The dimensions refer to the flashing frame itself. Before ordering, verify that your skylight model is compatible with this standard size and that your roof pitch does not exceed 30 degrees. Check your existing flashing or VELUX documentation to confirm the correct size for your installation.
- Dimensions: 94cm wide × 140cm high
- Designed for VELUX skylights
- Maximum roof pitch: 30 degrees
- Confirm compatibility with your skylight model before purchase
Material and construction
The flashing is manufactured from Grade A timber, which provides good durability and natural resistance to rot and insect damage. The timber is 25mm thick, offering robust support and stability during installation. The EDL finish is applied to protect the timber; note that this finish may affect the appearance of the product compared to untreated timber.
- Grade A timber construction
- 25mm thickness for strength and stability
- EDL finish for weather and pest protection
- EDL finish may alter appearance
Pre-installation checks
Before fitting, inspect the flashing for any damage or defects. Ensure your roof structure is sound and that the area around the skylight opening is clean and free from debris. Verify that your roof pitch is 30 degrees or less, and that all necessary roofing materials and sealants are to hand. Follow VELUX installation instructions carefully to achieve a proper weather-tight seal.
- Inspect flashing for damage before installation
- Confirm roof pitch does not exceed 30 degrees
- Prepare the roof opening and surrounding area
- Have all sealants and fixings ready before starting work