Fixing and buying guide
VELUX Plain Tile Flashings 94 x 98cm EDP PK04 0000
What this product is and who needs it
This flashing is a weatherproofing component that bridges the gap between a roof window or wall penetration and the surrounding roof surface. It is designed for builders, roofers, and serious DIY installers working on properties with flat roofs or walls where VELUX windows or similar penetrations need to be sealed against water ingress. The plastic construction provides durability and resistance to weather exposure over time.
- Use on flat roofs and walls where roof windows or penetrations meet the surface
- Suitable for new builds and retrofit installations
- Compatible with VELUX tile systems
- Appropriate for residential and commercial applications
Sizing and compatibility
The 94 x 98cm dimensions (37 x 39 inches) are designed for standard installations across multiple roof pitches. Before ordering, verify that this size matches your roof window opening and the surrounding roof area you need to seal. Confirm compatibility with your specific VELUX tile system and check that the flashing will sit correctly on your roof pitch.
- Dimensions: 94 x 98cm
- Compatible with VELUX tile systems
- Suits various roof pitches
- Check opening size and roof configuration before purchase
Installation and fixings
Installation must follow current best practice and VELUX manufacturer guidance. The flashing requires appropriate fixings suitable for your specific roof structure and material. Do not proceed with installation until you have obtained the relevant manufacturer instructions and confirmed that your chosen fixings are compatible with both the flashing and your roof substrate. Proper fixing is essential to maintain the watertight seal.
- Follow VELUX manufacturer guidance for your specific system
- Use fixings appropriate to your roof structure and material
- Ensure the flashing sits correctly before securing
- Verify all fixings are compatible with plastic construction
Pre-installation checks
Before installation, measure your roof opening and verify the 94 x 98cm flashing will provide adequate coverage around the penetration. Inspect the roof surface for damage or deterioration that may affect sealing. Confirm you have the correct VELUX tile system compatibility and obtain all necessary installation documentation. Check that you have suitable fixings on site and that weather conditions are appropriate for installation work.
- Measure roof opening and verify flashing size is correct
- Inspect roof surface condition
- Confirm VELUX system compatibility
- Obtain manufacturer installation guidance
- Ensure suitable fixings are available