Fixing and buying guide
VELUX Standard Flashings 94x160cm EDP PK10 0000
Who needs this product
This flashing kit is essential if you are installing or replacing a VELUX roof window on a pitched roof. It is suitable for both new installations and replacements where your existing window measures 94x160cm. You will need this product whether you are a professional roofer or a serious DIY customer undertaking roof window installation work.
- Installing a new VELUX roof window on a pitched roof
- Replacing an existing 94x160cm VELUX window
- Upgrading or repairing roof window weatherproofing
Compatibility and sizing
This flashing kit is designed exclusively for VELUX roof windows with dimensions of 94x160cm. It is rated for pitched roofs with a maximum slope of 45 degrees. Before purchasing, confirm your window size and roof pitch to ensure compatibility. Using the correct flashing size is essential for proper water drainage and weathertightness.
- Window size: 94x160cm only
- Maximum roof pitch: 45 degrees
- Integrates with standard roof tile and slate coverings
- Not suitable for flat roofs or pitches exceeding 45 degrees
What is included and pre-installation checks
This pack contains one complete flashing kit with all components needed to create a weathertight seal around your roof window opening. Before installation, verify that your VELUX window frame is in good condition and that your roof structure is sound. Check that your roof pitch does not exceed 45 degrees and that your existing roof covering (tiles or slates) is in serviceable condition. Ensure you have adequate access and safety equipment for working at height.
- Complete flashing kit supplied as one unit
- Confirm window dimensions match 94x160cm specification
- Inspect roof structure and covering condition
- Verify roof pitch is 45 degrees or less
- Plan installation to minimise disruption to roof covering
Installation considerations
Careful alignment of the flashing with your roof tiles or slates is essential to maintain the integrity of your roof covering and ensure proper water drainage. The flashing must be integrated correctly with the window frame to direct water away from the opening. Installation should be carried out methodically to avoid damaging existing roof materials. Consider engaging a qualified roofer if you are unfamiliar with roof work, as improper installation can compromise your roof's weathertightness.
- Align flashing carefully with existing roof covering
- Ensure proper integration with window frame
- Direct water drainage away from window opening
- Maintain roof covering integrity during installation
- Follow VELUX installation guidance for your specific window model