Fixing and buying guide
VELUX EDW MK06 2000 Pro+ Standard Flashings W/ Installation Products 78x118cm
Compatibility and sizing
These flashings are engineered for the VELUX EDW MK06 2000 Pro+ rooflight model only, sized at 78cm × 118cm. Before ordering, confirm your rooflight model and dimensions match exactly. The flashings accommodate both timber and concrete roof structures, so check your roof construction type to ensure suitability.
- Designed for VELUX EDW MK06 2000 Pro+ rooflights only
- Sized for 78cm × 118cm rooflights
- Compatible with timber roof construction
- Compatible with concrete roof construction
What is included
The flashing kit comes complete with all installation products needed to fit the flashings around your rooflight. This means you will not need to source additional fixings or sealing materials separately for the installation.
- Standard flashings sized 78cm × 118cm
- Installation products included in the kit
Installation and preparation
Standard flashings are designed for straightforward installation. Before fitting, ensure your rooflight opening is clean and free from debris. Check that the rooflight frame is level and square, and that your roof structure (whether timber or concrete) is sound and dry. The flashing will create a weather-tight seal around the rooflight perimeter when installed correctly using the included installation products.
- Clean the rooflight opening thoroughly before installation
- Ensure the rooflight frame is level and square
- Verify roof structure is sound and dry
- Use all included installation products as directed for weather-tight sealing