Fixing and buying guide
VELUX EDW SK01 2000 Pro+ Standard Flashings W/ Installation Products 114x70cm
Is this the right flashing for your skylight?
These flashings are engineered specifically for the VELUX EDW SK01 2000 Pro+ skylight model. Check your skylight documentation or product label to confirm you have this exact model before ordering. The 114 x 70cm flashing dimensions correspond to the aperture size of this skylight. If you are unsure of your skylight model or aperture size, measure the opening or contact VELUX technical support.
- Designed exclusively for VELUX EDW SK01 2000 Pro+ skylights
- Flashing size 114 x 70cm matches the skylight aperture
- Verify your skylight model before purchase
Timber and roof compatibility
These flashings are compatible with structural timber grades F16, F24, F32 and F36, which cover the vast majority of UK domestic and commercial roof construction. The flashings can be installed on roofs pitched up to 30 degrees. If your roof pitch exceeds 30 degrees or you are using timber of a different grade, you will need alternative flashing products.
- Compatible with timber grades F16, F24, F32 and F36
- Suitable for roof pitches up to 30 degrees
- Check your roof pitch and timber specification before fitting
What is included and material
The flashings are manufactured from durable PVC, which provides long-term weather resistance and durability. Installation products are included in this pack to support a complete, weather-tight fit around your skylight. Do not discard any components; all items in the pack are required for proper installation.
- PVC construction for weather-tight performance
- Installation products supplied in the pack
- Keep all components; nothing is surplus to requirements
Pre-installation checks
Before opening the flashing pack, confirm that your roof aperture is cut to the correct size (114 x 70cm) and that the surrounding timber structure is sound and level. Ensure the roof pitch does not exceed 30 degrees and that your structural timber grade is F16, F24, F32 or F36. Check that weather conditions are suitable for installation and that you have adequate access and safety equipment in place.
- Verify aperture dimensions match 114 x 70cm
- Inspect surrounding timber for damage or rot
- Confirm roof pitch is 30 degrees or less
- Ensure suitable weather and safe working conditions