How and where to use guide
VELUX EDP PK10 2000 Pro+ Standard Flashings W/ Installation Products 94x160cm
Suitable applications and roof types
These flashings are engineered for pitched roof installations where VELUX PK10 2000 Pro+ windows are being fitted. They work with standard pitched roof constructions and are essential for any roof window installation where weatherproofing is critical. The 94x160cm sizing matches the window dimensions precisely, ensuring proper integration with your roof structure. This flashing kit is not suitable for flat roofs or non-standard roof configurations.
- Pitched roof installations only
- Compatible exclusively with VELUX PK10 2000 Pro+ windows sized 94x160cm
- Standard roof construction applications
- New installations and roof window replacements
Installation and on-site use
Installation should be carried out during roof window fitting to ensure the flashing is properly integrated with your roof structure and covering materials. The kit includes all necessary installation products, which simplifies the process by eliminating the need to source additional components separately. Proper installation is critical to achieving a watertight seal; follow the specific guidance provided with the flashing kit and ensure the window frame sits correctly within the flashing before securing. The flashing must be positioned to direct water away from the window frame and into the roof covering below.
- Install during roof window fitting, before final roof covering
- Use all included installation products as specified
- Ensure window frame is correctly seated in the flashing
- Position flashing to direct water flow away from the window frame
- Seal all joints and edges to prevent water ingress
Maintenance and long-term performance
Once installed, the flashing system requires minimal maintenance to maintain its weatherproofing effectiveness. Periodically inspect the flashing and surrounding roof area for any signs of damage, debris accumulation, or deterioration. Clear any moss, leaves, or other debris that may collect around the flashing, as this can impede water drainage and compromise the seal. Check that all joints remain sealed and that no gaps have developed between the flashing and roof covering. Address any issues promptly to prevent water damage to the roof structure and interior.
- Inspect flashing regularly for damage or deterioration
- Clear debris and moss from around the flashing
- Ensure drainage pathways remain clear
- Check seals and joints remain intact
- Address any gaps or damage immediately
Important limitations and considerations
This flashing kit is sized and designed exclusively for 94x160cm VELUX PK10 2000 Pro+ windows on pitched roofs. Do not attempt to use these flashings with different window sizes, models, or roof types, as this will compromise the watertight seal and may result in water damage. Proper installation is essential; if you are uncertain about installation procedures, consult the detailed instructions provided with the kit or seek professional installation advice. The flashing system is only effective when all components are correctly positioned and sealed.
- Not suitable for flat roofs or non-standard roof configurations
- Compatible only with VELUX PK10 2000 Pro+ windows at 94x160cm
- Requires correct installation for weatherproofing effectiveness
- All included components must be used as specified