How and where to use guide
GGL SK01 2070 114 X 70 CENTRE PIVOT WHITE PAINTED
Typical applications and installation
This centre pivot roof window is ideal for loft conversions, attic spaces, and upper-floor rooms where roof-mounted glazing provides the primary light source. The pivot mechanism allows the sash to rotate from the centre point, making it particularly useful in confined spaces where traditional side-hung windows would be impractical. Install in pitched roofs between 15 and 90 degrees; the window is designed to shed rainwater effectively across this range. Ensure the rough opening dimensions match the product specifications and that the surrounding roof structure is adequately supported before fitting.
- Loft conversions and attic rooms requiring substantial natural light
- Pitched roof installations on domestic properties
- Spaces where side-hung or top-hung windows are not feasible
- Applications requiring both light and controllable ventilation
Safe and effective use
The centre pivot design allows the window to open safely without protruding into the room, reducing collision risks in confined spaces. Always ensure the window is fully closed and latched when unoccupied or during adverse weather. The white painted finish is factory-applied; do not sand or strip this coating as it provides weather protection. When opening for ventilation, operate the pivot mechanism smoothly and avoid forcing the sash. Ensure adequate roof ventilation around the window installation to prevent condensation and maintain air quality in the room.
- Open and close the pivot sash smoothly without forcing
- Keep the window fully closed during high winds and heavy rain
- Do not paint over or strip the factory white finish
- Maintain clear ventilation paths around the window frame
Maintenance and on-site tips
Regular maintenance ensures long-term performance and weather resistance. Clean the glazing and frame quarterly using mild soap and water; dry thoroughly to prevent water marks. Check the pivot hinges and operating mechanism twice yearly for smooth operation; apply a light machine oil if movement becomes stiff. Inspect the roof flashing and surrounding sealant annually, particularly after severe weather, to ensure the weather seal remains intact. Store the window in a dry, protected location on site before installation, and keep the packaging until final inspection confirms the unit is undamaged.
- Clean glazing and frame with mild soap and water, then dry
- Check pivot hinges and mechanism twice yearly for smooth operation
- Inspect roof flashing and sealant annually for weather integrity
- Protect the window from impact damage during storage and installation