Fixing and buying guide
3.6Mtr X 47 X 75mm C24 Treated Regularised KD Carcassing Timber
Selecting the right size
This product is supplied at 47 × 75mm cross-section in 3.6 metre lengths. C24 timber is suitable for floor joists, roof battens, stud walls, and decking frames. Check your structural design or building plans to confirm the required dimensions and spacing for your application. C24 offers enhanced strength and stability compared to C16 grade, making it suitable for applications requiring higher load-bearing capacity.
- Cross-section: 47 × 75mm
- Length: 3.6 metres
- Grade: C24 strength-graded
- Finish: Regularised and kiln-dried (KD)
Treatment and durability
This timber is pressure-treated with preservative to protect against rot, fungal decay, and insect infestation. The treatment provides long-term durability for both indoor and outdoor use. Treated timber is suitable for exposed or damp conditions where untreated timber would be at risk of deterioration.
- Pressure-treated for rot and decay resistance
- Protected against insect attack
- Suitable for outdoor and exposed applications
- Long-term durability in demanding environments
Storage and handling
Store timber in a dry, well-ventilated location to maintain its kiln-dried condition. Stack pieces horizontally with spacers between layers to allow air circulation. Protect from direct weather exposure during storage. Handle carefully to avoid damage to the planed finish. Wear appropriate personal protective equipment when cutting or working with the timber.
- Store in dry, ventilated conditions
- Use spacers when stacking to allow airflow
- Protect from prolonged wet exposure during storage
- Handle to avoid damage to the regularised surface
Compliance and standards
This C24 Treated Carcassing Timber meets current BS EN standards for structural timber. Strength grading to C24 ensures the timber meets specified load-bearing requirements for structural applications. Always refer to your building plans and local building regulations to confirm suitability for your specific project.
- Strength-graded to C24 standards
- Meets BS EN requirements
- Suitable for structural applications
- Verify compliance with your local building regulations