Fixing and buying guide

Understanding FD30 Fire Doors

The 'FD30' rating signifies that this door provides 30 minutes of fire resistance, a critical safety feature for internal applications. To maintain this rating, the door must be installed correctly with appropriate fire-rated hardware and frame components. This includes using fire-rated hinges, intumescent strips, and a fire-rated door frame. Failure to use compatible fire-rated components will compromise the door's fire resistance capabilities.

Choosing the Right Size and Quantity

This Antigua door measures 1981mm x 762mm x 44mm. Carefully measure your existing door opening to ensure this size is suitable. If replacing an existing door, measure its height, width, and thickness accurately. For new installations, ensure your door frame is dimensioned to accommodate these measurements. Always order the correct number of doors for your project, considering potential wastage or future needs.

Preparation and Finishing

The door is supplied white primed, which significantly reduces preparation time. Before applying your final topcoat, lightly sand the primed surface to ensure optimal paint adhesion. Use a high-quality paint suitable for internal doors. Ensure all edges, including the top and bottom, are adequately sealed with paint to prevent moisture ingress and maintain the door's stability. Any trimming of the door should be done carefully, and the cut edges must be re-primed and painted to protect the solid core.

• Lightly sand the primed surface before painting.
• Apply a suitable topcoat for internal doors.
• Ensure all edges are sealed with paint after trimming.

Installation Considerations

For an FD30 door, professional installation is highly recommended to ensure compliance with fire safety regulations. The door must be hung in a fire-rated door frame using a minimum of three fire-rated hinges. Intumescent strips must be fitted into the frame or door edges, and a suitable fire-rated latch or lock should be used. Ensure correct clearances around the door to allow for intumescent strip expansion in the event of a fire. Always refer to current building regulations and manufacturer guidelines for fire door installation.

• Use a fire-rated door frame.
• Install with a minimum of three fire-rated hinges.
• Fit intumescent strips to the frame or door edges.
• Ensure correct door clearances for fire safety.