Fixing and buying guide
PREMDOR Vertical 5 Panel Smooth FD30 FIRESHIELD 1981mm x 711mm x 44mm PEFC COMPLIANT
Understanding FD30 Fire Doors
The FD30 rating signifies that this door provides 30 minutes of fire resistance. This is crucial for meeting building regulations, particularly in areas designated as escape routes or for creating fire compartmentation within a building. Proper installation with compatible fire-rated frames, ironmongery, and intumescent strips is essential to achieve the stated fire resistance. Failure to use appropriate fire-rated components will compromise the door's fire performance.
Pre-installation Checks and Preparation
Before installation, inspect the door for any damage. The door is supplied with a white base coat, ready for on-site painting. Ensure the door is acclimatised to the environment where it will be installed to prevent warping or movement after fitting. This door measures 1981mm high, 711mm wide, and 44mm thick. Any trimming must be done strictly according to manufacturer guidelines for fire doors to maintain the FD30 rating. Always check the fire door label for specific trimming allowances.
- Verify door dimensions against the frame opening.
- Ensure the door is clean and free from dust before painting.
- Confirm all necessary fire-rated hardware (frame, hinges, latch, intumescent seals) are available.
Installation Considerations
Installing an FD30 fire door requires precision and adherence to fire safety regulations. Use only fire-rated door frames, hinges, and latch mechanisms. Intumescent strips must be fitted into the frame or door edges as specified by the manufacturer to seal gaps in the event of a fire. The 44mm thickness of this door contributes to its structural integrity and improved acoustic performance. Ensure all gaps around the door are correctly sealed with fire-rated materials.
- Use a minimum of three fire-rated hinges.
- Fit intumescent seals to the frame or door edges.
- Ensure consistent gaps around the door for proper operation and fire sealing.
Finishing and Maintenance
The smooth white base coat provides an excellent foundation for your chosen finish. Apply paint evenly, ensuring all edges are covered. Once installed and painted, regular checks should be made to ensure the door operates correctly, the seals are intact, and the hinges are secure. As a PEFC compliant product, the timber is sourced from sustainably managed forests, supporting responsible forestry practices.
