Fixing and buying guide
PREMDOR 4 PANEL SMOOTH FD30 FIRESHIELD 762MM X 1981MM X 44MM PEFC COMPLIANT
Understanding FD30 Fire Doors
The FD30 rating signifies that this door will maintain its integrity and limit the passage of smoke and flames for a minimum of 30 minutes in the event of a fire. This provides crucial time for evacuation and can help contain a fire. For an FD30 door to perform as intended, it must be installed correctly within a compatible fire-rated door frame, using appropriate fire-rated ironmongery (hinges, latches, closers) and intumescent strips. Failure to use all fire-rated components will compromise the door's fire resistance.
Product Suitability and Dimensions
This internal fire door features a traditional 4-panel design with smooth moulded faces, making it suitable for a wide range of residential and commercial interiors where fire safety is a requirement. The door measures 762mm in width, 1981mm in height, and has a substantial 44mm solid core construction, which also contributes to improved sound insulation. Always measure your existing door opening carefully to ensure this door size is appropriate. Remember that fire doors require specific clearances around the edges, so do not trim excessively.
Preparation and Finishing
The Premdor 4 Panel Smooth FD30 Fireshield door comes with a white base coat, making it ready for custom painting on-site. Before painting, ensure the door surface is clean, dry, and free from dust. Lightly sand if necessary to achieve a smooth finish. Use paints suitable for internal timber doors. As a fire door, it is crucial not to compromise the integrity of the door by applying excessive layers of paint that could affect the intumescent strips or the door's performance. The PEFC certification confirms the timber used is sourced from sustainably managed forests.
Installation Considerations
Correct installation is paramount for the fire door to function effectively. It must be fitted into a fire-rated door frame using a minimum of three fire-rated hinges. Intumescent strips must be fitted into the frame or door edges, which expand in heat to seal the gap between the door and frame, preventing smoke and flame spread. All ironmongery, including latches, locks, and door closers (if required), must also be fire-rated. We recommend installation by a qualified professional to ensure compliance with fire safety regulations and to maintain the FD30 rating.
- Use a fire-rated door frame.
- Install with a minimum of three fire-rated hinges.
- Fit intumescent strips to door edges or frame.
- Ensure all ironmongery is fire-rated.
- Do not trim the door excessively; refer to manufacturer guidelines for maximum trimming allowances.
