Fixing and buying guide

What this door is and who it suits

This is a pre-hung internal door with moulded four-panel design and textured facings. It suits homeowners and builders seeking a traditional-style door with quality appearance without premium pricing. The white base coat allows full customisation through on-site painting, making it ideal for projects where colour matching or bespoke finishes are required. The textured surface adds depth and character to interior spaces.

Sizing and compatibility

The door measures 762mm width by 1981mm height by 35mm thickness. These are standard UK internal door dimensions suitable for typical domestic doorways. Before ordering, measure your existing door opening or frame to confirm compatibility. Check that your frame is square and plumb, and verify that the opening height and width accommodate this door size with appropriate clearances for hinges and handles. The 35mm thickness is standard for internal doors and works with most UK door frames and hardware.

What you receive and pre-installation checks

You receive one complete door with moulded textured facings and white base coat applied. Before installation, inspect the door for any transport damage and check that all four panels and mouldings are intact. Ensure the door is stored flat and in dry conditions prior to fitting. Verify your frame is the correct size and condition, and confirm you have appropriate hinges, handles, and locks ready for fitting. Allow the door to acclimatise to room temperature and humidity for 24 hours before hanging.

• Check door and frame dimensions match before purchase
• Inspect for damage upon delivery
• Store flat in dry conditions
• Allow 24-hour acclimatisation before hanging
• Ensure hinges, handles, and locks are available

Finishing and painting

The door arrives with a white base coat, which provides a primer-ready surface for on-site painting. This allows you to paint the door to your chosen colour and finish specification. The textured moulded facings accept paint well and will enhance the final appearance once finished. Prepare the surface by light sanding if required, then apply your chosen topcoat paint system according to manufacturer instructions. This flexibility makes the door suitable for a wide range of interior design schemes.