How and where to use guide
PREMDOR 4 PANEL TEXTURED FD30 FIRESHIELD 686MM X 1981MM X 44MM
Typical applications and installation
This FD30-rated door is designed for internal use where fire safety regulations require fire-resistant doors. Common applications include hallways and escape routes in multi-occupancy residential buildings, communal areas in commercial premises, and separating doors between different occupancy spaces. The door dimensions of 686mm width by 1981mm height suit standard UK door frame openings. Installation requires a suitable fire-rated frame and hardware certified to maintain the FD30 rating. Ensure the frame, hinges, and closing mechanism are all specified and installed in accordance with the door's fire certification to preserve its performance rating. Always consult the manufacturer's installation instructions and relevant building regulations before fitting.
- Install into fire-rated frames with certified hinges and closers to maintain FD30 compliance
- Suitable for internal use in residential and commercial properties requiring fire safety
- Standard UK opening dimensions; check frame size before ordering
- Solid 44mm core provides structural integrity and sound insulation benefits
Finishing and painting
The door arrives with a white textured base coat, which provides an excellent surface for on-site painting. The textured finish ensures paint adhesion and delivers a professional appearance once decorated. Before painting, inspect the door for any damage sustained during delivery and storage. Light sanding may be required if the surface has accumulated dust or minor marks. Use quality interior paint suitable for moulded doors and apply according to the paint manufacturer's instructions. The textured surface will show brush marks less obviously than smooth finishes, making it forgiving for application. Allow adequate drying time between coats and ensure proper ventilation during and after painting.
- White textured base coat ready for immediate painting with interior emulsion or eggshell
- Textured surface masks brush marks and provides professional finish
- Light surface preparation may be needed after delivery
- Allow full drying time between coats as per paint manufacturer guidance
Fire safety and maintenance
The FD30 fireshield rating means this door will resist fire for up to 30 minutes under test conditions, providing critical time for occupants to evacuate. This rating is only maintained when the door is installed correctly with certified components and kept in good condition. Do not modify the door by cutting, drilling, or altering its structure, as this will compromise its fire rating. Regular maintenance involves checking that the door closes properly and the frame remains intact. Ensure the door is not wedged open during normal use, as this defeats the fire safety purpose. If damage occurs, assess whether the door's integrity has been affected and replace if necessary.
- FD30 rating valid only with correct installation and certified hardware
- Do not cut, drill, or modify the door structure
- Keep door in good condition and ensure it closes properly
- Do not wedge open during normal occupancy
On-site handling and storage
The door should be stored flat or stood upright in a dry environment before installation. Protect it from moisture, direct sunlight, and extreme temperature fluctuations, which can cause warping or damage to the moulded panels. Handle carefully during transport and on-site to avoid impact damage to the textured faces. The 44mm solid core is robust but the moulded panel design can be vulnerable to corner damage if dropped or knocked. Store in a secure location away from wet trades and building dust. Allow the door to acclimatise to the building environment for 24 to 48 hours before final fitting, particularly if there are significant temperature or humidity differences between storage and the installation site.
- Store flat or upright in dry, protected conditions
- Avoid moisture, direct sunlight, and temperature extremes
- Handle carefully to prevent impact damage to panels
- Allow acclimatisation period before installation in different environmental conditions