How and where to use guide
PREMDOR 4 PANEL TEXTURED FD30 FIRESHIELD 711MM X 1981MM X 44MM
Typical applications and installation
This FD30 fire-rated door is suitable for internal doorways in domestic properties, flats, and commercial buildings where fire safety regulations apply. The 711mm width fits standard UK door openings and the 1981mm height accommodates typical floor-to-ceiling dimensions. Install the door using appropriate fire-rated hinges, frames, and seals to maintain FD30 compliance. Ensure the frame is properly fitted, level, and plumb before hanging. The door must be hung with fire-rated hardware and fitted with appropriate intumescent seals or smoke seals as required by building control to preserve its fire rating.
- Internal doorways in hallways, bedrooms, kitchens, and commercial spaces
- New build and refurbishment projects requiring FD30 fire compliance
- Standard UK door frame openings with 711mm clear width requirement
- Domestic and commercial applications subject to building regulations
Finishing and painting
The door arrives with a white base coat and textured face finish, requiring on-site painting to achieve your final colour specification. Lightly sand the textured surface with fine-grit sandpaper to ensure paint adhesion, then apply quality interior paint suitable for moulded doors. Use a primer if changing from white to darker colours, and apply at least two coats of finish paint for even coverage. The textured face provides visual interest and helps conceal minor imperfections, making it forgiving for site finishing.
- Sand lightly with fine-grit paper before painting
- Apply primer when changing to darker colours
- Use quality interior paint suitable for moulded panel doors
- Apply minimum two coats for even colour coverage
- Textured finish helps conceal minor paint application variations
Fire rating compliance and maintenance
The FD30 fire rating indicates the door will resist fire for 30 minutes when tested to relevant standards, meeting building regulation requirements for internal fire safety. To maintain this rating, the door must be installed with fire-rated hinges, frame seals, and intumescent strips as specified by building control. Do not drill additional holes or make modifications that compromise the door construction. Regular maintenance involves keeping the door clean and checking that seals remain intact and functional. Avoid exposure to excessive moisture or damp conditions that could affect the moulded panel construction.
- Install with fire-rated hinges and intumescent seals to maintain FD30 rating
- Do not drill additional holes or modify the door construction
- Check seals and hinges regularly for damage or wear
- Keep door clean and dry; avoid prolonged moisture exposure
- Confirm installation meets building control requirements before completion
On-site handling and storage
Store the door flat or upright in a dry, protected location on site to prevent warping or damage to the moulded panels. Avoid leaning the door against walls or stacking other materials on top. Handle carefully during transport and installation to prevent impact damage to the textured faces. The 44mm thickness provides good rigidity, but care should still be taken to avoid dropping or striking the door. Protect the white base coat from dirt and dust during storage and before final painting.
- Store flat or upright in dry, sheltered conditions
- Protect from rain, damp, and direct sunlight during storage
- Handle carefully to avoid impact damage to textured faces
- Keep the white base coat clean before painting
- Do not stack heavy materials on top of the door