How and where to use guide
PREMDOR 4 PANEL TEXTURED FD30 FIRESHIELD 762MM X 1981MM X 44MM
Typical applications and locations
This FD30-rated door is suitable for internal doorways where fire safety regulations require a 30-minute fire resistance rating. Common applications include staircase enclosures, corridors serving multiple rooms, and compartmentation walls in residential and light commercial buildings. The door must be installed within a suitable fire-rated frame and with appropriate seals and hardware to maintain its FD30 performance. Always check your building control requirements and architectural specifications before installation, as fire-rated doors must form part of a complete fire-safety system.
- Staircase enclosures and fire-safety corridors
- Compartmentation walls in flats and apartments
- Commercial and institutional buildings requiring fire performance
- Must be installed in a fire-rated frame with fire-rated seals and hinges
Preparation and on-site painting
The door arrives with a white textured base coat that is ready for on-site decoration. Before painting, inspect the surface for any damage or debris and lightly sand if necessary to ensure paint adhesion. The textured finish provides good key for paint application. Use a quality interior paint suitable for timber or moulded surfaces, and apply according to the paint manufacturer's instructions. Allow adequate drying time between coats. Ensure the door is stored flat and protected from moisture and direct sunlight before installation and painting.
- Inspect door for damage before painting
- Light sanding may improve paint adhesion on textured surface
- Use quality interior paint suitable for moulded timber doors
- Allow full drying time between coats as per paint instructions
- Store flat and protect from moisture and weather until installation
Installation and fire rating maintenance
Correct installation is essential to maintain the FD30 fire rating. The door must be hung in a fire-rated frame using fire-rated hinges and hardware specified for FD30 applications. All gaps around the door frame must be sealed with fire-rated sealant or intumescent strips as required by building regulations. Do not modify the door by cutting, drilling, or removing panels, as this will compromise its fire performance. Ensure the door closes properly and latches securely. Once installed, the door should be treated as a permanent fire-safety component and not altered without consulting building control.
- Install only in fire-rated frames with fire-rated hinges and hardware
- Seal all gaps with fire-rated sealant or intumescent strips
- Do not cut, drill, or modify the door structure
- Ensure door closes and latches securely
- Treat as a permanent fire-safety element; consult building control before any alterations
Maintenance and durability
The 44mm solid construction provides good durability for regular use in internal applications. Maintain the painted finish by wiping down with a damp cloth and mild detergent as needed. Avoid excessive moisture exposure, as this can affect the door and frame. Check hinges and latches periodically to ensure smooth operation. The textured moulded panels are designed to resist minor knocks and wear typical of internal doors. Do not expose the door to direct external weather or high humidity environments, as it is designed for internal use only.
- Wipe with damp cloth and mild detergent for routine cleaning
- Check hinges and latches regularly for smooth operation
- Avoid prolonged moisture exposure
- Suitable for internal use only; not for external applications
- Textured moulded panels resist minor wear and impact