How and where to use guide
PREMDOR 6 PANEL MOULDED TEXTURED STANDARD CORE 686MM X 1981MM X 35MM
Typical applications and installation
This moulded panel door is suitable for internal use throughout residential properties and light commercial buildings. The standard 686mm width fits typical UK doorway openings, whilst the 1981mm height accommodates standard ceiling heights. Install the door using a suitable frame and hanging hardware appropriate to your wall construction. The 35mm thickness provides adequate rigidity for internal applications. Ensure the frame is plumb and square before hanging to prevent binding or gaps. The door should be hung using three quality hinges for smooth operation and longevity.
- Internal use only in residential and light commercial settings
- Fits standard UK doorway openings at 686mm width and 1981mm height
- Requires proper frame installation and three-hinge hanging system
- Suitable for new builds and refurbishment projects
On-site finishing and painting
The door arrives with a white base coat and textured moulded facings ready for decoration. The smooth faces are specifically designed to accept paint finishes, allowing you to match the door to your interior colour scheme on site. Before painting, inspect the surface for any damage sustained during transport and storage. Light sanding may improve paint adhesion if required. Apply a suitable interior paint system following the paint manufacturer's instructions for best results. The textured panel detail will enhance the visual depth of your chosen finish.
- White base coat provided; ready for on-site painting
- Smooth faces accept standard interior paint finishes
- Inspect for transport damage before decoration
- Light sanding recommended to improve paint adhesion
Performance and maintenance
The standard core construction provides good performance for internal door applications with reliable durability in normal domestic and light commercial use. The moulded panel design resists warping and maintains its appearance over time. Maintenance is straightforward: wipe down with a damp cloth to remove dust and debris, and touch up paint as needed to maintain appearance. Avoid exposure to excessive moisture or direct water spray, as this is an internal door not designed for external use. Check hinges and hardware periodically to ensure smooth operation.
- Standard core construction suitable for internal use
- Moulded panels resist warping and maintain appearance
- Clean with damp cloth; touch up paint as required
- Not suitable for external or high-moisture environments
Complementary options and glazing
Glazed options are available to complement this door range, allowing you to introduce light and visibility where required. Glazed panels can be specified for specific positions within the six-panel design, providing flexibility for hallways, kitchens, and other areas where borrowed light is beneficial. Consult with your supplier regarding glazed panel options and specifications to ensure compatibility with your project requirements.
- Glazed options available for enhanced light transmission
- Flexible panel glazing positions within six-panel design
- Suitable for hallways, kitchens, and internal divisions
- Confirm glazing specifications with your supplier